Uni to Uni Splice Knot


For tying PowerPro to mono of similar diameter

  1. Lay PowerPro and monofilament parallel, with 12" to 18" tag ends facing opposite directions.

  1. Loop the tag end of the mono around both lines, then pass the tag end through your loop 5 to 6 more times. Pull the tag end through your loop 5 to 6 more times. Pull the tag end to tighten the knot, making sure the wraps snug down neatly.

  1. Repeat step #2 using the PowerPro tag end, but use 8 to 10 wraps.

  1. Pull on the standing lines to jam the two knots together tightly.

  1. Trim the PowerPro tag end about